Skip to main content

Install Zebra LS2208 barcode scanner

Disclaimer

The links provided here belong to external sites; Zenoti bears no responsibility for the accuracy, legality, or content of the external site or for that of subsequent links.

To set up the Zebra LS2208 barcode scanner on your device, you must connect the scanner to your computer and follow the instructions in the quick start guide that came along with the scanner.

You must complete the following steps so that your scanner scans the barcodes correctly.

  1. Refer to the quick start guide for Zebra LS2208.

    The quick start guide lists all the default settings and the programmable parameters of the barcode scanner, such as connect host interface and keyboard wedge.

  2. Scan and make the required changes to the settings.

  3. Connect your Zebra LS2208 barcode scanner to your computer.

    Zebra LS2208 scanner is plug-and-play, the required software is installed automatically.

  4. To test whether your barcode scanner is set up properly, open a spreadsheet, scan a barcode, and check whether data appears in the selected cell.

    Barcodescanner_ExcelOutput.png