To use Plutus device and POS from your computer, you first need to install the following software:
Plutus USB cable device drivers
Plutus Pad Controller application
If you do not have access to these applications, contact Pine Labs Support.
Install USB Cable Device Drivers
Depending on which version of Windows you are using, you need to install the corresponding Plutus device drivers in the computers that you are accessing Zenoti from.
Zenoti has been tested for compatibility with the following versions of device drivers:
Windows 8 X64 and X86
Windows XP or Windows 7 x64 and x86
Note: X64 refers to 64-bit and X86 refers to 32-bit version of Windows. If your Windows operating system doesn't list either 32-bit or 64-bit, it implies you are running 32-bit operating system.
After you download the device drivers into your local machine, follow these steps to install the driver:
Double click the Setup_X64 or Setup_X86 depending on the version of your Windows.
On the installation wizard that opens, click Next.
On the License Agreement screen, select I accept this agreement, and click Next. The driver installation begins now.
When the drivers are installed and the success message is displayed in the wizard, click Finish.
Installing the Plutus Pad Controller
Navigate to the folder where you have downloaded the Plutus Pad Controller software, and click the Setup file.
On the installation wizard that opens, click Next.
On the next screen, select whether you want to restrict the use of Pad Controller for only your account or anyone who uses the computer. We recommended you to select Everyone.
Click Next.
The Pad Controller is installed on your machine. Once it is complete, the following icon appears on your Desktop. Double click the icon to open the Pad Controller application. You must keep this application open to take any payments using Plutus devices.
