If you have already configured Zenoti Payments and are only adding or replacing your existing card reader with Verifone e355, you must add Verifone e355 as a terminal in Zenoti.
Note: If you are configuring Zenoti Payments for the first time, follow the steps in configuring your Zenoti account to accept Zenoti Payments.

To add Verifone e355 as a terminal in Zenoti:

1. At the center level, navigate to Admin > Centers.
   The Manage Centers page opens.

2. Click the name of your center.
     All center settings categorized by tabs appear.

3. Click the Payment tab and expand Integrated Payment Processing.
    Depending on the country you are in, one or more payment processors appear.
    Note: If you configuring the payment processor at the organization level, you must  
    navigate to  Admin > Organization > Organizations > Payment > Integrated                   Payment Processor > Configure Payment Processors and proceed with the next
    step.

4. Locate Zenoti Payments payment processor and click Edit. 

    The Zenoti Payments Configuration screen opens.

5. Scroll to the Terminal Settings section and click Add Terminal.

    The Add Terminal window opens.     

6. For the Device Model, ensure that Verifone E355 is selected.

7. For the Device Mode, based on how your card reader is connected (WiFi or USB),
    select either USB or WIFI

    The configuration options change based on your selection.

Device Mode: USB    

     If you leave the Device Mode as USB unchanged, complete the following fields:

Device Mode: WIFI

       If you select the Device Mode as WIFI, complete the following fields:

  • Terminal Name: Enter a name of your choice for the terminal. 
  • Serial Number: Enter the serial number that is on the back of your Verifone e355 card reader.
  • Reader IP: Enter the IP address assigned to your device. 

8. Click Add.
     The terminal is added and appears on the screen.
     You can edit the terminal by clicking the pencil next to the terminal's name.
      Note: You cannot delete a terminal if it is the only one that is configured.

9. Click Save.
     You have successfully configured Verifone e355 as a terminal in Zenoti.

Depending on your setup, you can now initiate and accept card payments in Mirror mode and from Mobile POS and Desktop POS.

See Also


Did this answer your question?