For your Ingenico iSMP4 to process payments, it must be connected to the internet.

Note: For instructions on how to connect a Verifone MX 915 or Ingenico iPP320 card reader, refer this article.

To connect your Ingenico iSMP4 card reader to your internet

Access Device Functions

1.  Turn the Ingenico iSMP4 card reader on by pressing the power button on the right. 

2.   When the device powers on and displays the splash screen (refer to the image
       below), do the following:
       a. On the keypad, press the digits 2634.
       b. Press Enter (Green button).

   Press F for menu message appears on the card reader.

3. Press the F button.

    The Functions screen opens.

Power On WiFi

1. Scroll to and select 3-TDA (using the F2 button to scroll and Green button to enter)  
    or select it directly by pressing 3 on the keypad.

2. Press 0 on the keypad to enter 0-Configuration.

3. Press 0 on the keypad to enter 0-Communication.

4. Press 3 on the keypad to enter 3-Wifi Settings.

5. Press 0 on the keypad to enter 0-Power.

6. Press 1 on the keypad to enter 1-ON.

7. When you see a message to Save and Reboot, press 1 on the keypad.
     Note: If you do not see Save and Reboot, press the Cancel button (Red button)
     until you see the message.

Configure WiFi

1.   When the device powers on and displays the splash screen (refer to the image
     below), do the following:
       a. On the keypad, press the digits 2634.
       b. Press Enter (Green button).

   Press F for menu message appears on the card reader.

2. Press the F button.

    The Functions screen opens.

3. Press 0 on the keypad to enter 0-TELIUM MANAGER.

4. Press 3 on the keypad to enter 3-Initialization.

5. Press 2 on the keypad to enter 2-Hardware.

6. Press 5 on the keypad to enter 5-Wi-Fi.

7. Press 2 on the keypad to enter 2-Scan network.

    The card reader scans for available networks and displays them.
    Note: If you do not see the available networks, press the Cancel button (Red  
   
button) until you see the Press F for menu message, and start over from Step 2 of
    this procedure.

8. Scroll and select the network you wish to connect (using F2 or F3 keys and the
    Green button).

9.  Select the Security Type as HOME SECURITY.

10. Enter the WiFi Password.
      Tip: To enter your password:
       - Use the F1 and F4 keys to move left and right.
       - Use the F2 and F3 keys to move down and up.
       - Press the Green button on the keypad to select the highlighted character.

11. After you enter your password, scroll to (using F1, F2, F3, or F4 keys) and highlight
     the Green button on your card reader display and press the Green button on the
     keypad.        

The password is saved.

12. Enter 20 as the Priority and press the Green button on the keypad.

You have successfully configured the WiFi 

 13. Press the Cancel button (Red Button) until to see the Press F for menu message.
       If your card reader is connected to the network, you will see the network the card
       reader is connected to and the signal strength. 

Set POS Comm Type 

These final steps ensure that your card reader communicates with Zenoti to process payments when connected to a WiFi network.

1. Press the F key
   The Functions screen opens.

2. Scroll to and select 3-TDA (using the F2 button to scroll and Green button to enter)
    or select it directly by pressing 3 on the keypad.

3. Press 0 on the keypad to enter 0-Configuration.

3. Press 0 on the keypad to enter 0-Communication.

4. Press 0 on the keypad to enter 0-Comm. Type.

5. Press 1 on the keypad to enter 1 - Ethernet.

6. When you see a message to Save and Reboot, press 1 on the keypad.
     Note: If you do not see Save and Reboot, press the Cancel button (Red button)
     until you see the message.

7. After the device reboots, an Activation Code displays on the screen. Make a note of
    the Activation Code. You will need it to add the device as the payment terminal.
    Note: If you do not see the Activation Code, try rebooting the card reader.

See Also


Did this answer your question?